Another issue you may run into on some Honda and Acura vehicles is a start/stall condition, or that the vehicle just stalls for no reason while driving. This is often caused by a faulty ignition switch. If you find this to be the case, you don’t need to replace the entire ignition lock cylinder. You only need to replace the electrical portion which is fastened to the back of the assembly. It’s not that expensive and fairly easy to replace. Just remove the steering column covers to gain access to the part. If you see melted solder inside the cover when you remove it, it’s likely you’re on the right track to a fix as this is one of the tell tale signs of a failed ignition switch. Here’s a video showing how to check for this problem on your Honda.