2001 Grand Prix SE 3.1 engine

[wafrederick]

The Intake gaskets,Dorman sells the kit with everything with new intake bolts and uses upgraded intake gaskets made out of metal.One warning also,make sure you put the push rods in the right spot when reinstalling them or you will bend valves.The push rods are two different lengths,6 short and 6 long.If the fuel pump is bad,don’t buy an airtex and they have high failure rates.Get a Delphi or AC Delco pump instead.The tank does not have to come out on that one I believe,there is an access hole you remove a plate in the trunk area http://www.dormanproducts.com/p-5335-615-205.aspx?year=2001&make=PONTIAC&model=GRAND%2520PRIX%253A%2520SE&engine=V6%2520%252D%25203%252E1L%2520%2528189%2520CID%2529%253A%2520GAS%253A%2520FI%253A%2520N%253A%2520J&parttype=Intake%2520Manifold%2520Gasket%2520Set