I did voltage test on the on the pump circuit and did have voltage, I don’t remember the reading now. I didn’t know about the voltage drop test and I’m not sure how to access the pins on the pump with the connectors together. The tank is very clean inside so sediment is not an issue. Here’s a new wrinkle, the pump started working again today, so I’m thinking you are on the right track, it’s not the pump at all. I’ve tried to check all the connections and grounds and used a scan tool and have no codes set. I’m going to check some more tomorrow but I don’t have near the expertise that you guys do and may have to bite the bullet and take it to the dealer. Anyway thanks a lot for the help!
- Home
- 2004 Ford Escape