Thanks a ton! I got it all back together now I just need to torque it all down. Did a left rear wheel hub /bearing due to a bad wheel speed sensor and struts on both sides (they were shot, don’t buy unity (I know, no sh**)).
AC Delco quick struts seem to be moogs and I pulled the part number off the a.c. delco strut and besides an AC Delco sticker, the bump stop and everything else matches as well as the part number stamped on the side.
I’ll put the tires on and drop it onto 2 subaru rims (another project) layed down so I can get under it safely and torque everything down while it has weight on it so I don’t stress the new bushings.
Thanks again!
Vlad