If I have read your post right is says that the car was running ok prior to performing work on it. after the work it will not start ( cranks over ok but does not fire up? ) plugs were changed, ( was the distributor position disturbed during the recent repairs ? ) if it ran before and the distributor was not loosened nor disturbed then chances are it isn’t timing. I would double check the cap and rotor. make sure they are ok. you said you did plugs… did it fire up after the plug replacement ? if it didnt fire after the plug job I would check them as well. next would be fuel pressure , make sure that is good. keep us posted .
- Home
- 89 honda accord not starting