• Home

Reply To: Honda CRV – Help with codes

Dao Yang

Solved. When I disconnected the right rear abs sensor, I noticed that one of the two wires on the plug was slightly pulled out. I wasn’t entirely sure if I had caused it when I pulled off the connector so I decided to diagnose and checked the sensor for resistance with a multimeter. It was reading something which led me to think the abs sensor may still be functioning… so I pushed the pin back and plugged it back into the harness. I reset the code. And voila no more codes. Drove about 15 miles today and no more lights.

Also I would have just replaced the sensor IF I could remove it without breaking it. Tried to free it but it’s pretty stuck. I don’t want to deal with pulling the hub either if it did break. This worked out thankfully.