Menu
  • Home
  • Any good techniques on installing a 4 point strut bar?

Any good techniques on installing a 4 point strut bar?

#443703
619DioFan619DioFan
Participant

    You don’t need to jack the car for this job ( better if you don’t ) sometimes in the manufacturing process of the strut bar the heat from the welder will cause the metal parts being welded to contract leaving the component slightly ” short ” you said it was off by about 1/2 inch ( with one side mounted ) here is what to do- with one side mounted make sure the bolt holes in the strut bar are indeed in line with the mounting bolts ( yes , I realize they are 1/2 ” off ) now remove it from the car secure it in a vice ( or some other way ) and smack the bar a few times with a BFH on the mounting bars ( the parts that attach to the strut tower ) then try again , keep checking till you are where it needs to be , then install. in this world of mass production sometimes parts need to ” adjusted ” LOL

    Loading…
    slot gacor https://ibufoundation.or.id/totoup/ situs togel situs togel togel online bo togel situs togel situs togel toto macau agen toto situs togel situs toto bo togel situs togel situs togel resmi situs togel situs toto situs togel situs togel situs togel situs toto togel online situs toto rimbatoto rimbatoto rimbatoto situs toto bo toto situs toto situs togel situs toto slot gacor situs toto https://fbik.unissula.ac.id/bandar/ situs toto slot gacor https://tp.fkip.ulm.ac.id/toto/ slot gacor slot gacor