Menu
  • Home
  • any tips on ball joints and tie rod ends?

any tips on ball joints and tie rod ends?

#443720
ytramytram
Participant

    Type of vehicle may help get you better help.
    One tip.
    Make sure steering wheel is centered straight forward before you begin. You also need to a way of measuring tie rod lengths to get a good rough alignment. I measure between inside rim at back and to front of inside rim. By doing this, I use a solid object such as a 1×2 furring strip, that is just short on length to go in between rims, and use measuring tape for one end only. Pay attention to how you can accurately place furring strip in exact repeated locations. Do not take loose untill you have done that first. Do one side at a time.
    They will still need alignment, but should get in a ballpark area to get to the alignment shop.

    Loading…
    slot gacor https://ibufoundation.or.id/totoup/ situs togel situs togel togel online bo togel situs togel situs togel toto macau agen toto situs togel situs toto bo togel situs togel situs togel resmi situs togel situs toto situs togel situs togel situs togel situs toto togel online situs toto rimbatoto rimbatoto rimbatoto situs toto bo toto situs toto situs togel situs toto slot gacor situs toto https://fbik.unissula.ac.id/bandar/ situs toto slot gacor https://tp.fkip.ulm.ac.id/toto/ slot gacor slot gacor