Menu
  • Home
  • Re: My Euro 200SX/240SX Rebuild/upgrade project – Daily with performance SR20DET

Re: My Euro 200SX/240SX Rebuild/upgrade project – Daily with performance SR20DET

Home Forums Stay Dirty Lounge What Are You Working On? My Euro 200SX/240SX Rebuild/upgrade project – Daily with performance SR20DET Re: My Euro 200SX/240SX Rebuild/upgrade project – Daily with performance SR20DET

#465738
road2perfectionroad2perfection
Participant

    Today I started cleaning the intake manifold, and they are now clean for any oil and dirt ! 😀
    However I’ve not done anything technical to them as of yet, I started with the throttlebody.
    I will keep the stock throttlebody cause other throttlebody’s that you get as a tuning part are usually just larger.
    My build will be just 350 WHP max! internal parts will be easily able to do 600+! but I want response and reliability.
    So the stock throttlebody will give be just that, response!

    The stock body is forged and haven’t been machined to remove edges and have a rough surface.
    The butterfly plate also is angled at idle, I’ve decreased this angle slightly by making the whole thing slightly larger and increased the angle at full throttle from 85 degree angle to exact 90 degree, that will also move more air, less resistanse and since it’s small it will have velocity and that’s what you need for response.
    So I’ve improved velocity and throughput without much cons, took some time though.

    Loading…
    situs togel situs togel togel online bo togel situs togel situs togel toto macau agen toto situs togel situs toto bo togel situs togel situs togel resmi situs togel situs toto situs togel situs togel situs togel situs toto togel online