- This topic has 2 replies, 3 voices, and was last updated 12 years, 9 months ago by
.
-
Topic
-
-
Replies
-
I don’t know much about the vehicle your talking about or fords in generally but with some older model vehicles the cruise is controlled by a cable attached to the throttle body. the cable moves freely with the throttle body until the cruise control is engaged. once its engaged the cable holds the throttle in place. if the referenced vehicle has a similar set up then that where i would look first. check to make sure the cable is still attached and not frayed. if the cables is broken then you will need to replace it.
It could be a number of things if I’m honest but a common cause of the cruse not working is the brake light switch, you might want to check your brake lights to make sure they work properly. Other than that the best place to get information is the service manual as different manufacturers use different methods of making curse control work.
- You must be logged in to reply to this topic.