Menu

2006 Hyhundai Santa Fe slide pins

Home Forums Stay Dirty Lounge Service and Repair Questions Answered Here 2006 Hyhundai Santa Fe slide pins

Tagged: 

This topic contains 4 replies, has 2 voices, and was last updated by Kevin Jones Kevin Jones 7 months ago.

  • Creator
    Topic
  • #940488
    Kevin Jones
    Kevin Jones
    Participant

    Hello I’m curious to know why there are 2 different slide pins in my 2006 Santa Fe braking system? One has a flat surface and I’m puzzled to know why this is and which one goes where? Thanks.

Viewing 4 replies - 1 through 4 (of 4 total)
  • Author
    Replies
  • #940501
    Nightflyr *
    Richard Kirshy
    Participant

    I believe if you look inside the hole where the pins were removed, you should see a rubber bushing in one of them ( I believe the top one )
    Odd that it didn’t come out with the pin.
    It goes with the pin with the flats.

    #940690
    Kevin Jones
    Kevin Jones
    Participant

    Hi Richard and thanks for the reply.
    One pin has a rubber bushing on it and the other has a flat but my buddy removed them (while doing my brakes) and wasn’t sure which one went where?
    So does the rubber/pin go on top or?

    #940693
    Nightflyr *
    Richard Kirshy
    Participant

    Rubber on top and remember to clean and lube the pins with the proper brake grease.

    #940980
    Kevin Jones
    Kevin Jones
    Participant

    Thanks Richard he actually used standard petroleum grease on all 4’s MEH!
    I can’t do it now but in Spring I will flush and use the proper.
    Thank-you

Viewing 4 replies - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.

Loading…