This topic contains 0 replies, has 1 voice, and was last updated by Vlad2 2 years, 6 months ago.
I am about to change my front wheel bearings on my 2011 Honda Pilot. Got new Timken bearings so I am all set. I just need to get the 36mm socket to take off the axel nut (damn, 34mm from my W bodies is too small).
Anyways, I check on the forums for this car and they are saying the torque on the new axel nut is “Spindle nut torque is 242 lbf/ft” 242 ft/lbs feels a lot to me. Like Crushing the bearing too much.. Plus my torque wrench only goes to 150… so… Is this spec true?
You must be logged in to reply to this topic.