This topic contains 2 replies, has 2 voices, and was last updated by 
Nicole D’Ambroise 1 month, 1 week ago.
-
Topic
-
Everything in the front is new and alignment was performed by Ford Dealership 5 days ago. It has had a popping for a few years now when shaking the steering wheel while the car is running and in park, only on drivers side. When I put it in reverse, it pops once on drivers side. When I take off in drive it pops once. When I come to a complete stop it pops once. I have replaced everything in the steering and suspension with Motorcraft only parts (including the rear suspension). Front drivers side tire keeps wearing even with a good alignment. Please help me! What has been replaced in less than 6 months:
Steering Rack
Inner and Outer Tie Rods
Sway Bar Links
Lower Control arms/ball joint
Intermediate steering shaft
Cv Joints
Wheel Bearings
All motor and transmission mounts
Struts
Springs
Strut mounts
-
Replies
-
Is the pop you are mentioning a noise of metal hitting? If you could share a video of the issue, that would give us a better view of the issue.
I figured it out. It needs a 4th rack in less than 10k miles. Any idea why it keeps going through racks?
You must be logged in to reply to this topic.
