Menu

ac clutch disk removal

Home › Forums › Stay Dirty Lounge › Service and Repair Questions Answered Here › ac clutch disk removal

This topic contains 3 replies, has 3 voices, and was last updated by Nightflyr * Richard Kirshy 9 months, 4 weeks ago.

  • Creator
    Topic
  • September 27, 2019 at 1:16 am #894571
    paul
    paul
    Participant

    Please someone help out here,..
    I have a 199 pathfinder 4×4 LE model with bad ac compressor pulley. I have trouble getting the clutch disk out without a tool that Nissan recommended J-38874. no local store has such a tool
    as this one J-38874.

    any suggestion?

    best regards,
    paul

  • Creator
    Topic
Viewing 3 replies - 1 through 3 (of 3 total)
  • Author
    Replies
  • September 27, 2019 at 4:19 am #894573
    Billy
    Billy
    Participant

    Looks like your options are buy the tool ($250 used on eBay), make your own, or pay a shop to swap the pulley.

    December 6, 2019 at 8:33 am #895421
    paul
    paul
    Participant

    I found a tool that works well from amazon and only cost me $11.
    However, the shaft diameter from the air compressor is too small and the new bearing fit too loose. do you ever see this happen? do I need a new complete AC unit?

    regards,
    cpaul

    December 6, 2019 at 2:24 pm #895422
    Nightflyr *
    Richard Kirshy
    Participant

    If you can not cobble one together.
    See if this helps:
    There is one listed on ebay: Kent Moore J-38874 Clutch Plate Holder Remover and Installer Set
    Priced @ $35.00 w/ free delivery.

  • Author
    Replies
Viewing 3 replies - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

Loading…