Air bag light stays on

Hello,

I just purchased a 2004 Chevy impala for cheep AS IS. Ran a scan with Blue Drver scan tool. The scan came back with these error codes under the section “Air Bag System”:

B0014-Deployment loop error
B0018-Deployment Loop error
B0024-Steering coil spring error
B0100-Front impact sensor error
B1000- ECU malfuntion

I don’t think the air bags have been deployed on this car. So with all these codes, is it a bad ECU or could it ba a bad SRS module throwing all these codes???
If in fact its the ECU, I did find a used one on ebay. Do these have to be programmed to each vehicle? Easy to swap out??

Thanks for any help!

Tony

Topic