Menu

Broke exhaust bolt

This topic contains 2 replies, has 2 voices, and was last updated by  Jonathan Garcia 4 months ago.

  • Creator
    Topic
  • #894673

    Jonathan Garcia
    Participant

    Exhaust bolt broke when replacing my torque strut mount. It seems to have a rounded piece on the back of it and it might welded to they exhaust. Do I need to drill it out or what are my options?

Viewing 2 replies - 1 through 2 (of 2 total)
  • Author
    Replies
  • #894675

    Billy
    Participant

    Pic would help, but it sounds like you’re talking about a stud in an exhaust flange. Those can be just press-fitted or tack welded. Easiest approach is remove the pipe, secure the flange against a vise anvil, etc., get the flange hot, and beat out the stud with a big-ass hammer.
    If it’s welded, you may need to drill it out.

    #894678

    Jonathan Garcia
    Participant

    Is it safe for me to do this while it is attached to the vehicle?

Viewing 2 replies - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

Loading…