Bushing press tool / vibration

Home Forums Stay Dirty Lounge Service and Repair Questions Answered Here Bushing press tool / vibration

This topic contains 0 replies, has 1 voice, and was last updated by Trace Osbourne Trace Osbourne 2 years, 5 months ago.

  • Creator
  • #984883
    Trace Osbourne
    Trace Osbourne

    Hey Eric. I have been watching your videos on YouTube for quite some time now and must say that they are well put together. I have two questions for my 2002 civic Ex model, D17A2,17L, i have two questions for you and i hope you can help with both. First is bushing press for front control arms and the rear trailing arms. My last question is that I’m having some vibrations with this car for some months now and not sure what causing it. The mounts are new but not the dealers choice but aftermarket.i do some valve adjustments a couple times but I’m not if thats the issue.i use feeler gauge 0.08 for the intake and 0.09 on the Exhaust. I watched your video on a honda where yyou used 0.08 for the intake and 0.10 for the Exhaust side but not sure if what i used is what causing the vibration or its my ECU is the issue. Please help with your opinion

You must be logged in to reply to this topic.