Menu

Driver door power failure

This topic contains 3 replies, has 2 voices, and was last updated by Nightflyr * Richard Kirshy 2 years, 7 months ago.

  • Creator
    Topic
  • #963020
    Amber Scott
    Amber Scott
    Participant

    I’ve lost all power to my driver door and a window is stuck open because of it. I checked all the fuses related to it, the wiring is intact, and I cleaned the chip board under the buttons. Any ideas on what else i can do? I live in a rainy area and n.y window asap!

Viewing 3 replies - 1 through 3 (of 3 total)
  • Author
    Replies
  • #963027
    Nightflyr *
    Richard Kirshy
    Participant

    Suggest you check to see if the window drive motor is getting power on command from the switch.
    If it does, then you most likely have a faulty window drive motor.

    #963129
    Amber Scott
    Amber Scott
    Participant

    I guess I should clarify. The window on the driver door is fine. The entire door has no power. And it is a different window that has a broken button that is stuck down. Any suggestions on why my driver door had no power?

    #963130
    Nightflyr *
    Richard Kirshy
    Participant

    Start simple …
    Check the fuses.
    Next would be to inspect the wire loom that goes from the door jam into the vehicle for any signs of wear or damage to the casing or wires.

Viewing 3 replies - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

Loading…