This topic contains 0 replies, has 1 voice, and was last updated by Alejandro Ruiz Báez 1 month, 1 week ago.
Lately I have been changing bulbs in the dashboard and console for LED bulbs.
All tests have gone well but in the last one when turning on the lights have illuminated for a moment and have gone out. Right now the main light of the dashboard does not illuminate and none of the console and neither the left front and rear position light. To point out that the lights of the indicator and turn signal lights are illuminated on the dashboard.
I have checked the fuses and there is none blown and checking with a multimeter the battery does not seem to have any short circuit. Checking also the wires of the bulbs that have been touched there is none that is in bad condition and the pins of the connections are fine.
I don’t know if it could be an error in the bcm, but I honestly don’t know how to check it. No error code appears.
The bulbs have not melted as I have tested them in another car and they work and are correct for the car as in previous tests all of them have been lit without problem.
I don’t even know what to check anymore, does anyone have any idea what it could be?
The car is a Hyundai Accent 1.3 from 2001.
Thank you very much.
You must be logged in to reply to this topic.