This topic contains 1 reply, has 2 voices, and was last updated by 
Richard Kirshy 2 years ago.
-
Topic
-
I’m having an issue that I haven’t been able to find any content on on Youtube. There are loads of videos troubleshooting issues with automatic sliding doors, but very few where the mechanic is working on manual doors. My issue is with the latching mechanism and I recorded a video showing the issue for clarity. If anyone knows how to resolve this please let me know!!
Video detailing issue: https://www.youtube.com/watch?v=MpQm_AmySWI
-
Replies
-
Just spit balling here.
That broken part appears to be an alignment pin Used to align the door to the B pillar when closing.
That needs to be replaced.
If you look closely, the lower striker pin that seats into the B pillar is what mechanically latches the door.
Suggest you try cleaning and lubricating the striker and catch inside the B pillar.
Also, I believe that bulk connector on the door needs to make clean contact with its mate on the B pillar.
Make sure contacts on both halves are clean and repair the protective boot.
You must be logged in to reply to this topic.
