Menu
  • Home
  • Topic
  • Honda Odyssey cleaning cylinder heads

Honda Odyssey cleaning cylinder heads

Home Forums Stay Dirty Lounge Service and Repair Questions Answered Here Honda Odyssey cleaning cylinder heads

This topic contains 0 replies, has 1 voice, and was last updated by Craig Erickson Craig Erickson 8 months, 2 weeks ago.

  • Creator
    Topic
  • #993898
    Craig Erickson
    Craig Erickson
    Participant

    I have a 3.5L Honday Odyssey engine that I purchased from JDH with supposidly 65K maximum miles. The engine is out of the vehicle and I removed the valve covers to adjust the valves. I found exactly the same as you found in your Pay if Forward video series – the rear head closest to the firewall was all gunked up, yet the front head was fairly clean. Since the engine is out of the vehicle, what would you recommend? Should I remove the head and clean in a parts washer? Should I try to clean in place on the engine taking care to remove the gunk and not let it pass through any passages? If I use a solvent-based cleaner do I need to replace the cam shaft seal? What would you do? thank you. Craig

You must be logged in to reply to this topic.

Loading…