Thread Lock on Inner Tie Rod?

Home Forums Stay Dirty Lounge Service and Repair Questions Answered Here Thread Lock on Inner Tie Rod?

This topic contains 1 reply, has 2 voices, and was last updated by college man college man 10 months, 2 weeks ago.

  • Creator
  • #895288

    I got a 04 Nissan Sentra and I’m replacing inner and outer tie rods on it. I took off the inner tie rod and it wasn’t to bad to break loose. These tie rods I imagine are from factory when the car was built. The inner tie rod doesn’t have a locking washer to it or thread lock on it, connecting to the rack from what I see and in fact the threads have alot of grease/oil on it.
    I’m looking to see what you guys do when screwing an inner tie rod to rack, if Thread Lock is needed (if so red or blue)? I even called a local Niissan and they say they don’t use it either.

Viewing 1 replies (of 1 total)
  • Author
  • #895293
    college man
    college man

    you could use some blue loctite but not necessary.

Viewing 1 replies (of 1 total)

You must be logged in to reply to this topic.