Home › Forums › Stay Dirty Lounge › Service and Repair Questions Answered Here › ABS Light › ABS Light
January 8, 2012 at 11:00 am
#442950
Quoted From johnzcarz:
What you may be feeling is the abs activating. Even though you should use a scope to see the waveform from the abs sensors, you might want to just try and measure the resistance of each one and see if you find 1 that’s different than the others. All you have to do is follow the wire back from the sensor to the connector and measure it there. Check resistance between the 2 conductors as well as between each conductor and a good ground.
That’s true, Im going to call autozone and see if they do abs scans. If not ill have to take it in at a garage and have them scan it. Then get the codes.