This topic contains 0 replies, has 1 voice, and was last updated by 
William Poggi III 2 years, 11 months ago.
-
Topic
-
I have wheels that come off a vehicle that has 14Mx1.5″ studs.
The pattern and hub are the same but the car I want to put them have 12Mx1.5″ Studs.
Of course because of the 2mm differ in diam, the 12M studs don’t fill the holes as good as the 14M do.
I take the lugs down to proper torque, everything seems well.My question is that will the 2mm larger in diam for the holes over time effect anything?
You must be logged in to reply to this topic.
