This topic contains 0 replies, has 1 voice, and was last updated by carlos berdeal 2 years, 11 months ago.
-
Topic
-
So I have a 2005 accord 2.4l ex 2 door that this week started giving me problems. It started Monday when I got a P0303 error (cylinder 3 misfire). Cleared the code with my little tool and was on my way. It started giving me start up problems that sound just like if the timing belt jumped a tooth, but eventually will startup take a few seconds to “catch” and then it runs smooth. Today when I went to leave work, I tried to start it and it acted like all the valves were closed and the starter would stop after a second. after about the fourth attempt to start it, It started spinning the motor, engine started firing and again the hesitation was a lot. After about 6 or 7 seconds of hesitation, it “caught” and Idled fine. I drove my 25 miles home with no issue. Any Ideas as to where to look as I am new to this engine.
You must be logged in to reply to this topic.