Menu

2010 Honda Odyssey

  • Creator
    Topic
  • #891087
    Gerald HixGerald Hix
    Participant

      I’ve recently bought a Honda Odyssey. It’s a very nice vehicle but it needs work. I’ve bought new suspension components to replace the worn one on there now. I need to replace the struts so I watched the video Eric made on his 2001 Odyssey and got some insights on how that is done. I’m also going to replace the control arms and antiroll bar links. The reason I’m writing this on the video that showed the way the strut on the drivers side was replaced, It showed at the end him putting on the tire before he finished tightening up the main bolt on the strut. There are two bolts upper and lower. The upper was not tightened down. I’m assuming that the camera was not rolling when he tightened it down. Eric may not have this vehicle anymore. Very nice vehicle and I’m still trying to figure out how to use all the features it has. It’s the touring model. I would appreciate any information as to specific problems to address. So far I have to replace the timing belt which I was told was already replaced. The dealership says that wasn’t done. That is something I’m capable of doing.

    Viewing 2 replies - 1 through 2 (of 2 total)
    • Author
      Replies
    • #891092
      Nightflyr *Richard Kirshy
      Participant

        If this is the video you mentioned…

        Go to time mark 41:16 to 43:20 of the video.

        #891097
        Gerald HixGerald Hix
        Participant

          At 41:33 I now see where Eric used the impact to tighten the bolt. Seeing that bolt before he put the wheel on and the silvery shiny surface makes it look like it wasn’t tightened. I have a habit of checking on various connections after I complete a job to make sure that I don’t miss anything. Problem for me is having someone helping me work on something and they don’t check. That is when things go wrong.
          I actually had a neighbor insist on helping me work on his vehicle. I should have refused. He put the tire back on and before I could check anything he was in a hurry to drive it around. Ended up he forgot to tighten down the wheel lug nuts and he took it to someone else. They went over what I had done and couldn’t find anything wrong with my work. As he was leaving the owner of the garage was standing next to the truck and saw the loose wheel with the loose lug nuts as he was driving away.

        Viewing 2 replies - 1 through 2 (of 2 total)
        • You must be logged in to reply to this topic.
        Loading…
        situs togel situs togel togel online bo togel situs togel situs togel toto macau agen toto situs togel situs toto bo togel situs togel situs togel resmi situs togel situs toto situs togel situs togel situs togel situs toto togel online situs toto rimbatoto rimbatoto rimbatoto situs toto bo toto situs toto situs togel situs toto