Menu

Engine coolant Drain Plug

This topic contains 1 reply, has 2 voices, and was last updated by Nightflyr * Richard Kirshy 3 weeks, 5 days ago.

  • Creator
    Topic
  • #963372
    Walter
    Walter
    Participant

    Where is the engine coolant drain pug on a 2013 V6 Honda Accord? I’m not looking for the radiator drain pug.

    Thanks!

Viewing 1 replies (of 1 total)
  • Author
    Replies
  • #963389
    Nightflyr *
    Richard Kirshy
    Participant

    Your looking the block drain ….
    The block drain is on the rear side of the engine, toward the passenger side. There is a nipple coming out from inside the nut, so you can fit a drain hose on it, then loosen the nut. A good bit of coolant will come out. A box-end wrench is the best way, because you need to have the hose attached to the nipple.

Viewing 1 replies (of 1 total)

You must be logged in to reply to this topic.

Loading…