- This topic has 1 reply, 2 voices, and was last updated 7 years, 7 months ago by .
-
Topic
-
So I was fiddling around in the engine bay, changing some coolant hoses and I needed to take the fuel lines that go in the fuel rail. It took quite a bit of effort, but I got it out. The problem is that now I can’t put it back in. It seems to always go at an angle and when I go to tighten it, it goes a couple of cycles and it stops… I have no idea what size the fitting is to try an fit a normal bolt to try and clean up the damaged threads on the female line… The stupid part is that I don’t really see that much damage anyway… only two threads seem to slightly bent…
Any help
- You must be logged in to reply to this topic.