Misfire Problems

[college man]

I would start with a power balance test. to see if power is_x000D_
equal across the cylinders. When you changed the plugs_x000D_
and wires. Did you use OE wires? These engines only like_x000D_
NGK plugs and wires. is the distributor after market?_x000D_
I would also plug your co

Topic

[Matt]

Great post by College Man as usual.

[Vistaman73]

I’ll be sure to do tests on it tomorrow. I believe the wires are AC Delco the box is upstairs I’ll double check. I used Bosch Iridium tip. I know I should have got NGK but I wasn’t thinking. Also, I haven’t

[EricTheCarGuy]

You are the reason I made this video series_x000D_
Solving Performance Problems 1http://www.youtube.com/watch?v=rsGTeWayqIUSolving Performance Problems 2http://www.youtube.com/watch?v=sAKwCzUE_9MRe Performance Problemshttp://www.youtube.com/watch?v= … MGY_x000D_

[Vistaman73]

Thanks a lot Eric and 3SheetsDiesel. I’ll replace the plugs with the right ones like I should have done in the first place. I was wrong on the wire brand. They are BWD Select. About a year ago I had a no start issue so I replaced the Igniter, still didn’t

[3SheetsDiesel]

Here’s my thoughts on the matter.

[Author]

Replies