My car wont start

[college man]

try holding the gas peddle to the floor while trying to start it._x000D_
the car maybe flooded. you could also try spraying starter_x000D_
fluid in the intake to see if it starts. if it starts then fuel issue._x000D_
if not spark issue. heres some videos to help in your di

Topic

[JoshMc]

If the injectors are not getting the signal to fire you could have a blown fuse, crankshaft position sensor issue, ignition module issue or a bad wire somewhere. How did you determine that the injectors are not getting the signal?

[Maggi111]

[quote]Quoted From JoshMc: _x000D_
_x000D_
If the injectors are not getting the signal to fire you could have a blown fuse, crankshaft position sensor issue, ignition module issue or a bad wire somewhere. How did you determine that the injectors are not gettin

[Maggi111]

I cheked the ohms on the sensors in the distributor they are supposed to be maximum 700 and they are 830 can that couse this problem??

[John B Kobberstad]

Quoted From Maggi111:_x000D_
_x000D_
My car will not start it cranks good but the injectors will not get signal_x000D_
BTW this is 98 honda civic sohc

_x000D_
_x000D_
How much pressure at the rail for the fuel?

[John B Kobberstad]

Any codes set?

[Trcustoms719]

Can you hook up a noid light to the one of the injector plugs?_x000D_
Thats the best quickest way to check for injector pulse._x000D_
You should have power on one of the wires with the key on (use a test light) if you do then the computer is not sending a signal to f

[dreamer2355]

99.9% of the time, PCM’s are not at fault unless someone has damaged them from incorrect testing and frying the drivers._x000D_
_x000D_
I would gain evidence that your PCM is bad before R&R’ing it. Wiring diagrams and a DVOM will be your friend here as well as a

[Maggi111]

If i plug my multimeter to ground and one of th wires in the fuel injection i get 12,something volts When i have the key on And if i put the multimeter prongs to the both injector wires at one injector i dont get anything even when my friend cranks the en

[moparfan]

a muitimeter probably wont ever pickup the signal. you will need a noid light or atlest a fuel pressure gauge to see if the injectors are firing._x000D_
_x000D_
this is a ground switched injector system. so you will have battery voltage to 1 wire and the other is the

[Maggi111]

I replaced the distributor with the sensors for the injection and still no start

[Maggi111]

Quoted From johnbkobb: _x000D_
_x000D_
Any codes set?

_x000D_
_x000D_
I checked it the paperclip method and i got stable enine light wich i think is a code 0

[EricTheCarGuy]

By any chance do you have an aftermarket distributor?

[Maggi111]

I have a used distributor i live in iceland and the dealer for honda called bernard charges i 50.000 kr wich is about 500$ and that is way to expensive for me

[dreamer2355]

Did you determine that you have spark?_x000D_
_x000D_
No Spark Diagnosis video by Eric -_x000D_
_x000D_
http://www.youtube.com/watch?v=9K78XIhhjAQ_x000D_
_x000D_
The links College Man posted should help._x000D_
_x000D_
And Honda’s do not like aftermarket ignition system components._x000D_
_x000D_
And you have a 98

[Maggi111]

[quote]Quoted From dreamer2355: _x000D_
_x000D_
Did you determine that you have spark?_x000D_
_x000D_
No Spark Diagnosis video by Eric -_x000D_
_x000D_
http://www.youtube.com/watch?v=9K78XIhhjAQ_x000D_
_x000D_
The links College Man posted should help._x000D_
_x000D_
And Honda’s do not like aftermarket ignit

[Author]

Replies