Menu
  • Home
  • Topic
  • Persistent Misfire cylinder 3, 3.6l dodge Dakota

Persistent Misfire cylinder 3, 3.6l dodge Dakota

Home › Forums › Stay Dirty Lounge › Service and Repair Questions Answered Here › Persistent Misfire cylinder 3, 3.6l dodge Dakota

  • Creator
    Topic
  • May 31, 2016 at 1:30 am #859456
    Jessica SmockJessica Smock
    Participant

      Keep getting Misfire code for cylinder 3. 2006 dodge Dakota 3.6l.. have Changed plugs, coil and done compression test which was fine no serious difference in any cylinders. I’m serious frustrated and sick of the engine light.. I’ve got no other codes popping anymore. Also the wiring looks fine..

    • Creator
      Topic
    Viewing 3 replies - 1 through 3 (of 3 total)
    • Author
      Replies
    • May 31, 2016 at 3:53 am #859465
      Nightflyr *Richard Kirshy
      Participant

        Have you checked for a possible vacuum leak around cylinder #3
        Have you checked for a possible faulty crank / cam sensor ( not sure if one or both control ING spark)

        May 31, 2016 at 4:04 am #859468
        Jessica SmockJessica Smock
        Participant

          We did replace the crank shaft sensor a couple months ago at most. How can we check for a vacuum leak? And we did check the spark it was good.

          May 31, 2016 at 5:47 am #859473
          Nightflyr *Richard Kirshy
          Participant
          • Author
            Replies
          Viewing 3 replies - 1 through 3 (of 3 total)
          • You must be logged in to reply to this topic.
          Loading…