Menu
  • Home
  • Topic
  • Tire replacement with same model and wear

Tire replacement with same model and wear

Home › Forums › Stay Dirty Lounge › Service and Repair Questions Answered Here › Tire replacement with same model and wear

Tagged: 

  • Creator
    Topic
  • January 10, 2021 at 3:03 pm #988064
    Drew DeliaDrew Delia
    Participant

      I blew out my front tire. Do I need an alignment if I replace the blown tire with a used tire of the same brand and similiar tread wear?

    • Creator
      Topic
    Viewing 4 replies - 1 through 4 (of 4 total)
    • Author
      Replies
    • January 10, 2021 at 5:35 pm #988067
      Nightflyr *Richard Kirshy
      Participant

        First off,
        Depending how far and fast you drove and how much damage you did while driving on a flat is what will determine if the vehicle requires repair and alignment.

        January 11, 2021 at 9:33 am #988074
        Drew DeliaDrew Delia
        Participant

          Thanks Richard. Was driving about 10-15mph when I clipped a curb. After that, drove on it for about 30 yards to put the donut on in a safe location.

          January 11, 2021 at 10:28 am #988076
          Cameron StasneyCameron Stasney
          Participant

            I’d say to just put the tire on, and see how hard it pulls after, and go from there.

            January 11, 2021 at 8:35 pm #988104
            Nightflyr *Richard Kirshy
            Participant

              Kissing a curb is never a healthy thing for a front end.
              My suggestion would be to invest in getting the front end alignment checked.

            • Author
              Replies
            Viewing 4 replies - 1 through 4 (of 4 total)
            • You must be logged in to reply to this topic.
            Loading…