Forum Replies Created
-
AuthorReplies
-
Also by any chance are these Xenon bulbs?
Also by any chance are these Xenon bulbs?
are there any other issues along this? Hazard lights not working? signal indicator going faster than normal? dash lights? any electrical issues?
Also, does it tend to happen when the season becomes cooler and more damp? Are the lights OEM or after market like aftermarket Xenon or LED.
are there any other issues along this? Hazard lights not working? signal indicator going faster than normal? dash lights? any electrical issues?
Also, does it tend to happen when the season becomes cooler and more damp? Are the lights OEM or after market like aftermarket Xenon or LED.
UPDATE: Looked into it a bit more and found out it is most likely a warn out engine mount. Here are the links and it is all the same issue as I have.
http://repairpal.com/low-rumbling-sound-when-in-reverse-bad-engine-mounts-598
http://repairpal.com/bad-engine-mounts-may-cause-vibration-roughness-and-rattle-964
http://www.carcomplaints.com/Honda/Civic/2008/suspension/noise_in_rear_vibration.shtml
http://community.cartalk.com/discussion/2282932/2008-honda-civic-making-shaking-noise
So I will take it to the mechanic and see if it solves the problem. I will update you guys when/if it is solved
UPDATE: Looked into it a bit more and found out it is most likely a warn out engine mount. Here are the links and it is all the same issue as I have.
http://repairpal.com/low-rumbling-sound-when-in-reverse-bad-engine-mounts-598
http://repairpal.com/bad-engine-mounts-may-cause-vibration-roughness-and-rattle-964
http://www.carcomplaints.com/Honda/Civic/2008/suspension/noise_in_rear_vibration.shtml
http://community.cartalk.com/discussion/2282932/2008-honda-civic-making-shaking-noise
So I will take it to the mechanic and see if it solves the problem. I will update you guys when/if it is solved
oh ok. I driver back and forth to Lansing MI once a week. So rack up a lot of miles. Thought it was necessary.
But I will keep note of that.
Could it be fluid is not making it through some of the passages? Like Eric showed in his transmission tear down video? Because as mentioned above these issues do not exist once the fluid is very warm.
oh ok. I driver back and forth to Lansing MI once a week. So rack up a lot of miles. Thought it was necessary.
But I will keep note of that.
Could it be fluid is not making it through some of the passages? Like Eric showed in his transmission tear down video? Because as mentioned above these issues do not exist once the fluid is very warm.
[video]https://www.youtube.com/watch?v=keBX450HXyk&list=UUcfIg5A38kFrkYqptqn3vdA[/video]
Here is the link. Hope the phone microphone was sensitive enough so you can hear it. Maybe you can hear it better with head phones.
Also note, I usually let it warm up more than this however wanted to make sure you can hear it.
As mentioned above, the engine becomes louder and the whole car starts to vibrate when going into reverse but once the brake is released the sound goes away. Also when the car is driven around a lot the noise is not there.
Any ideas?
Thanks again
[video]https://www.youtube.com/watch?v=keBX450HXyk&list=UUcfIg5A38kFrkYqptqn3vdA[/video]
Here is the link. Hope the phone microphone was sensitive enough so you can hear it. Maybe you can hear it better with head phones.
Also note, I usually let it warm up more than this however wanted to make sure you can hear it.
As mentioned above, the engine becomes louder and the whole car starts to vibrate when going into reverse but once the brake is released the sound goes away. Also when the car is driven around a lot the noise is not there.
Any ideas?
Thanks again
Ya I was thinking that too. Or maybe when the car is cooler the idle creates a certain ton that causes it to vibrate. I will try to video record it tomorrow morning.
Ya I was thinking that too. Or maybe when the car is cooler the idle creates a certain ton that causes it to vibrate. I will try to video record it tomorrow morning.
It doesn’t seem like an exhaust leak. The whole car vibrates. and once the brake is release and moving backwards it is fine.
-
AuthorReplies