Forum Replies Created
-
Replies
-
p0300–p0301–p0304… no timing codes.. vehicle starts and runs like its out of time.. on start up when cold int/sol % is at 0 — and int/timing is around 20′— i cannot see exhaust vvt system stuff on this car because i need to update my scanner (which i will do today) but after vehicle warms up, int/timing’ goes to 0 as it should at idle. keep in mind it being 20′ when cold is not right and i think the pcm is trying to compensate for out of time issue. the solenoids that operate the vvt system are working correctly. so i checked timing using the cam/crank correlation test watching on a scope meter and comparing to a known good pattern. This is what shows me its off by at least a tooth.
i don’t know why it is but i have found a weird stalling issue like this , ONLY on the 05 dodge rams where the front left speed sensor wiring somehow correlates with the throttle body and causes the same type of issue (i do not remember this code being thrown tho) but its worth the quick check of the wiring, make sure its not grounding somewhere.