Removing Rotor Screws
Some brake rotors are held on with screws or other fasteners. These can rust into place and be very difficult to remove.
I’ll start by saying that some disagree with this method because they don’t like the idea of hitting two hammers together. I have not had issues doing this, but I strongly urge you to use safety glasses when performing this procedure. For starters, see if you can get your hands on an impact driver. It’s much easier to use this tool to remove stubborn brake rotor screws.
If the impact driver doesn’t work, place the ball end of a hammer on the rotor screw. Strike the hammer on the screw with another hammer a few times. This normally breaks up the rust and frees the screw.
If that doesn’t work, I use a punch and a hammer. I start by hammering the punch into the rotor screw. I then change the angle of the punch so that when I strike it with a hammer, it moves in a counterclockwise direction. Honestly, I prefer an air hammer to hand tools for this, but hand tools will work in a pinch. I’m often asked if you need to reinstall these screws; you don’t. Once you bolt the wheel down, the rotor will be held in place just fine. They install the screws at the factory to make it easier to install the brake components. Installing the screws makes installing the caliper and brake pads easier, but it’s not necessary.
Here’s a video on the process.
Video Title: Removing Rotor Screws – Solving Brake Problems – EricTheCarGuy Video Description: In this Article we show what to do when Removing Rotor Screws.
Polished face, bevel, and pein. Head finished in rust resistant black paint. Compression wedge hickory handle. Concentrically ground, polished striking...
Maximum comfort; Anti-Vibration feature reduces tool vibration by over 30 pre when compared to standard air Hammers in it Class...
T-Handle and full drill bit set Built in level for projects For wood, metal and masonry
No pressure points – The goggles sit comfortably due to the hard / soft component mix of the contact surface....